ConcreteCostEstimate

Home › Slab Cost Calculator

Concrete slab cost calculator

Find out what a concrete slab will cost to pour, from a small shed base to a 40 × 60 shop floor.

Prices updated November 2026

Size
ft
ft
in
Materials
$/yd³
US average is about $160–$180
Labor and area
$/sq ft
Use 0 if you do it yourself
%
5–10% is normal
Your estimate$0
See breakdown

How to use it

  1. Enter the slab length and width in feet.
  2. Enter the thickness. Most patios and shed bases are 4 inches; garages and shops are 5 to 6 inches.
  3. Pick reinforcement, base and finish, then set your area.

Slab cost formula

Cubic yards = length × width × (thickness ÷ 12) ÷ 27, plus waste

Total = concrete + short-load fee + (base + steel + finish) × area + labor × area

Example: 30 × 30 slab, 4 inches

900 sq ft needs 12.22 cubic yards with waste. Concrete at $165 a yard is $2,017. Base and mesh add $1,170 and labor adds $3,600. Total: about $6,787, or $7.54 per sq ft.

Cost of common slab sizes

4 inches thick, installed, average US prices.

SizeAreaConcreteInstalled cost
10 × 10100 sq ft1.2 yd³$600 – $1,200
12 × 12144 sq ft1.8 yd³$864 – $1,728
16 × 20320 sq ft4.0 yd³$1,920 – $3,840
20 × 20400 sq ft4.9 yd³$2,400 – $4,800
24 × 24576 sq ft7.1 yd³$3,456 – $6,912
30 × 30900 sq ft11.1 yd³$5,400 – $10,800
30 × 401,200 sq ft14.8 yd³$7,200 – $14,400
40 × 602,400 sq ft29.6 yd³$14,400 – $28,800

Very small slabs often cost more per square foot because many contractors charge a minimum of $1,500 to $2,500.

Slab cost by thickness

ThicknessCoverage per yardTypical use
4 inches81 sq ftPatios, walkways, shed bases
5 inches65 sq ftDriveways, hot tub pads
6 inches54 sq ftGarages, shops, RV pads

Ways to lower the cost

Questions people ask

How much does a concrete slab cost per square foot?

Most 4-inch slabs cost $6 to $12 per square foot installed. Reinforced slabs run about $7 to $14 and decorative slabs $12 to $28.

How much does a 30x30 slab cost?

A 30x30 slab is 900 square feet. At 4 inches thick it needs about 11 cubic yards and usually costs $5,400 to $10,800 installed.

How much does a 40x60 slab cost?

A 40x60 slab is 2,400 square feet. At 4 inches it costs roughly $14,400 to $28,800 installed. At 6 inches for a shop, expect more.

Should I use rebar or wire mesh?

Wire mesh or fiber is fine for most patios and walkways. Use rebar for driveways, garages, and any slab that will carry heavy loads.

How thick should a slab be?

4 inches for foot traffic, 5 inches for cars, and 6 inches for trucks, RVs or heavy equipment.

More concrete calculators

Estimates use 2026 US averages and are for planning only. Real prices depend on your contractor, site and local market.